SIHOO M18 Manuel Utilisateur page 4

Assemble Introduction
Use 10 screws of M6*12
1 2
specification to fix the five chair
leg tubes to the chair leg tube
connection base and then insert
the wheels;
Fix the back plate to the seat
5
4 cushion with 3pcs big shim
and 3pcs (M8*45) screws.
1.Please use on the flat floor and one chair can only bear one person's weight;
Pls read the Safety
2.To avoid using the wrong screws, please fix all the screws before tightening them;
Instructions below
3.Please don't let the child sit on the chair alone if he is under 5 year-old;
4.Please don't sit on the armrest, in case cause some danger;
carefully.
5.Do not stand on the chair or use it as a ladder or footsteps;
6.Please don't put on the chair overweight, or used as trolley;
7.Don't use sharp or hooked objects to scrape the chair.Do not close the fire;
8.To advoid any harm to your fingers.
Don't insert your finger into the mechanism while sitting.
01
(The size will be according to regular practice)
First, insert the chair foot trim
3
Fix the armrest to the seat
cover into the chair foot, and then
put the air pressure rod into the cushion with 6pcs small shim
middle hole of chair leg tube and 6pcs（M6*25）screws.
connection base;
Put the mechanism into the
Insert the headrest into the slot.
6
gaslift.
Functions
(The size will be according to regular practice)
Headrest height
adjustment
Armrests height
adjustment
Backrest tilt angle
adjustment：
Pull out &Push in
Seat height
adjustment：Rotate
Parts list
(The size will be according to regular practice;one each exact for spare)
Castor:5pcs Chair leg tube:5pieces
Gas lift:1pc Backrest:1pc
Hex wrench:1pcs Big shim:3+1pcs
Armrest screw(M6*25):6+1pcs
Chair leg screw(M6*12):10+1pieces
0 1 2 3 4 5
Lumbar support depth &
height adjustment
Backrest tilt tension
adjustment
Meanwhile pull the
knobs at the two sides.
The foot pad can be
pulled out to use
Seat cushion:1pc Armrests:1pair
Headrest:1pc Small shim:6+1pcs
Back plate screw(M8*45):3+1pcs Chair foot trim cover:1piece
Notice: Before installation,
pls classify the screw,
measure the screw lengh
to easy assemble.
Chair leg tube connection
base:1piece
6 7 8 9 10 cm
02