Gardner Bender GB-4 Wiregard Fiche Technique Et Instructions De Montage

Wiregard™
Electrical Wire Connector
gB-4
DIMENSIONS
A
(in) 15/16 17/64 15/64 7/16 35/64
gB-4
(mm) 23.8 6.8
APPLICATION
Use GB-4 WireGard™ twist-on wire connector in general purpose
applications of 2 or more copper wires. GB-4 connectors feature side
knurling for easy grip.
SPECIFICATIONS
WireGard™ connectors shall feature straight type shell and steel inner
spring and be suitable for connecting copper wire from #22 to #10 AWG.
Spring shall be plated to resist corrosion and have a square profile to
provide secure contact with wires.
Connectors shall be rated for use with 600 V building wire / 1000 V lighting
applications plus be UL listed and CSA certified for applications up to 105 °C.
WireGard™ connectors must have few turns to meet required torque, meet
or exceed UL pull out and dielectric test requirements.
INSTALLATION INSTRUCTIONS
1. Strip wire 7/16" (11.1 mm).
2. Pretwisting unnecessary. Hold stripped wires together with ends even.
(Lead stranded wires slightly).
3. Align any frayed strands or conductors.
4. Screw on connector; push wires firmly into connector when starting.
5. To be sold only with installation instructions.
! !
WARNINg: Shut off power before working on a circuit. Use
approved materials and conform to all electrical codes.
CONSTRUCTION
Shell: Polypropylene, Color - Yellow
Innerspring: Zinc plated, square profile steel wire
Temperature Rating: 105 °C (221 °F)
WIRE RANgE
#22 to #10 AWG Solid or Stranded conductors
Copper conductors only, 600 V max. building wire;
1000 V max. for lighting fixures and luminaries/signs
REgULATORY APPROVALS
UL: List for pressure type wire connectors per UL 486C,
file number 61X5. UL94V-2 flame retardant.
Gardner Bender l Milwaukee, WI 53209
Made in China/Hecho en China/Fabriqué en Chine
DATA SHEET / HOJA DE DATOS / FICHE TECHNIQUE
(Yellow)
B C D E
6.0 11.1 13.9
l www.gardnerbender.com
l ZX429
gB-4 Wiregard™
A
B
C
D
E
Wire Connector
61X5
l Questions or Comments 800.624.4320
WIRE COMBINATIONS / COMBINACIONES
DE CABLE / COMBINAISONS DE CABLES
LISTED FOR USE WITH: COPPER TO COPPER
Temperature rating: 105 °C (221 °F) Listed as a
PRESSURE TYPE wire connector for the following
solid and/or stranded wire connections:
CLASIFICADO PARA USARSE CON:
COBRE A COBRE
Especificatión de temperatura: 105 °C (221 °F)
Clasificado como un conector de cable TIPO A
PRESION para uso con las siguientes conexiones
de cable macizo y/o trenzado:
POUR USAGE DE: CUIVRE A CUIVRE
Cote de température: 105 °C (221 °F) Connecteur
A PRESSION pour les combinaisons suivantes de
fils pleins et/ou à brins:
600 V max. building wiring
1000 V max. lighting fixtures/
luminaires & signs
Capacidad nominal de
600 V Máx. para cableado
en general, para equipos
de iluminación y letreros
eléctricos a 1000 V Máx.
Fil de bàtiment de 600 V
Max., appareillage électrique
et enseignes de 1000 V Max.
1 #10, 12 / 14
2 / 3 #12
2 - 4 #14
2 - 6 #16 / 18
3 - 6 #20
4 - 6 #22
1 #10 + 1 #12
1 #10 + 1 / 2 #14 / 16
1 #10 + 1 - 3 #18
1 #12 + 1 / 2 #14, 16, 18, 20 / 22
2 #12 + 1 #14, 16, 18, 20 / 22
1 #14 + 1 - 3 #16, 18, 20 / 22
2 #14 + 1 / 2 #16, 18, 20 / 22
3 #14 + 1 #16, 18, 20 / 22
1 #16 + 1 - 5 #18 / 20
1 #16 + 2 - 5 #22
2 #16 + 1 - 4 #18, 20 / 22
3 #16 + 1 - 3 #18, 20 / 22
4 #16 + 1 / 2 #18, 20 / 22
5 #16 + 1 #18, 20 / 22
1 #18 + 2 - 5 #20 / 22
2 #18 + 1 - 4 #20 / 22
3 #18 + 1 - 3 #20 / 22
4 #18 + 1 / 2 #20 / 22
5 #18 + 1 #20 / 22
1 #20 + 2 - 5 #22
2 #20 + 1 - 4 #22
3 #20 + 1 - 3 #22
4 #20 + 1 / 2 #22
5 #20 + 1 #22
DS-0004