Samsung HW-J7500R Mode D'emploi page 8

Method 3. Connecting to a Wireless Network
Installing the Samsung Multiroom App and Connecting Wirelessly
To install Samsung Multiroom app for the first time, follow
the steps shown below.
1. Press and hold the SPK ADD button on the rear of the
Soundbar for more than 1 second.
• There is a notification sound and the message
"ADD SPEAKER" appears on the Soundbar's main
unit. Afterwards, the message "WIFI READY" appears
when standby-for-connection mode activates.
2. Connect your smart device (smart phone, tablet, etc.)
to your wireless router.
Internet
3. Install the Samsung Multiroom app on your smart device (smart phone, tablet, etc.).
4. Launch the Samsung Multiroom app.
5. Complete the initial settings by following the instructions on the app screen.
Start screen
c You must enter the password of your wireless router to connect your Soundbar to your wireless network
through Samsung Multiroom app.
c If your wireless router has no designated password, the app completes the initial settings without asking you
to enter a password.
Wireless Router
Android
Samsung Multiroom app
Complete the settings
by following the
instructions on the
Samsung Multiroom
app screen.
Entering the password
for the wireless router
· 8 · English
Wi-Fi SETUP
Samsung
Multiroom
iOS
SPK ADD
DC 24V
Rear of Soundbar
Samsung
Multiroom
Smart Device
Speaker connection
complete