Sissel SPINEFITTER Linum Mode D'emploi page 10

SPINEFITTER by SISSEL
• The SPINEFITTER by SISSEL
suitable for repeated use on additional per-
sons. In general, the applicable national re-
gulatory requirements for the hygienic
reprocessing of medical devices must be
observed and error-free function must be
ensured.
• The product can be wiped with standard
cleaning and disinfecting agents for poly-
urethane surfaces.
• Use a soft cloth and no abrasive agents. Do
not use agents containing phenol or those
containing the substance diethylene glycol
monoethyl ether.
Disinfection measures are to be carried
out exclusively with suitable disinfectants
that have been tested for effectiveness.
Disinfectants that can damage the materi-
als of the product must be avoided.
The application instructions of the disin-
fectant manufacturer must be observed.
Note: The use of unsuitable preparations or
preparations that have not been tested for ef-
fectiveness or their incorrect use will void the
warranty and guarantee claims.
Linum Pro
®
Linum Pro is
®
6. DISPOSAL & ENVIRONMENT
Product: The product and the accessories
supplied can be disposed of with household
waste.
Packaging: No special types of packaging are
used. The respective valid disposal guidelines
must be observed.
7. WARRANTY
The warranty is governed by the statutory
provisions.
Note: Operators of this product must comply
with the regulatory requirements for medical
devices applicable at the place of use.
Any warranty is excluded if goods delivered by
GmbH have been handled, treated or
SISSEL
®
modified by others without consent or if the
instructions for use have not been followed.