Publicité
Les langues disponibles
Les langues disponibles
HFB SERIES
CANARM FILTER BOXES
FIGURE 1:
ACCESS DOOR REMOVAL & REPLACEMENT
2 ceiling mounting holes on each side.
FIGURE 3:
PREPARE FOR MOUNTING & LIFTING
NOTE: Use only approved lifting methods and safety cautions!
WARRANTY
CANARM Ltd. warrants every new unit to be free of defects in material and workmanship to the extent that, within a period of one year
from the date of purchase CANARM Ltd. shall either repair or replace at CANARM Ltd. option, any unit or part thereof, returned freight
prepaid and found to be defective.
This warranty does not include any labour or transportation costs incidental to the removal and reinstallation of the unit at the user's premises.
NOTICE: No warranty claims will be honored by CANARM Ltd. unless prior authorization is obtained.
Canarm Ltd. - Corporate Head Office
Tel: (613) 342-5424
M-HFB 04/07/21
Duct, or unit mounting flange.
See chart on page 1 for
inlet/outlet dimensions.
2 door securing
bolts on each side.
Carefully remove
door to access filter
compartment.
Prepare ceiling mounting
location in advance.
2157 Parkedale Avenue, PO Box 367
Fax: (613) 342-8437
FIGURE 2:
FILTER ACCESS AND REPLACEMENT
Aluminum pre filter. Use internal rails
for 1" filter. Not required for 2" filters.
FIGURE 4:
MECHANICAL CONNECTIONS
DUCT OR
BLOWER IN
Pre filter
HEPA filter
NOTE: Ensure the orientation of the filter box aligns with
the airflow of your system.
Brockville, Ontario Canada
hvacsales@canarm.ca
Turn Cam lock
handle to
release/engage
HEPA filter.
HEPA filter. Ensure
gasket is down for
a proper seal.
AIRFLOW
DUCT OUT
Ensure unit is properly
fastened, and secure in
its application.
K6V 5V6
www.canarm.com
Page 2 of 2
Publicité
