Télécharger Imprimer la page

Fremont & Park 195T1104-31 Instructions D'assemblage

Publicité

Liens rapides

Thank you for purchasing this product. Please take time to read and follow the instruction below. Check that you have all parts and hardware
before assembly. Parts apprently missing are often found in the packing materials. If you do not have all parts listed, have your dealer contact
us and they will be sent to you emmidiately.
Merci d' avior acheté ce produit. Veuillez lire et suivre les instructions ci-dessous. Vérifiez avant le montage que vous avez toutes les pièces et
fixations. Les piéce qui semblent manquer se trouvent dans les matériaux d'emballage. Si vous n'avez pas toutes les piéces de la liste demandez
à votre détaillant et nous vous les enverrons immédiatement.
!
It is recommended to install protective pads under all legs and support to avoid damage or scratches when placing furniture on a wood
floor or otherhard surface, and to limit indentation and prevent discoloration if placing on carpet.
!
Il est recommandè de placer des coussins protecteurs sous tous les pieds et toutes et les bases des meubles pour éviter d'endommager
ou d'égratigner les planchers en bois ou autres surface dures, et pour limiter inte la décoloration quand les meubles reposent sur la moquette.
PART LIST / LISTE DE PIECES
1
Coffee table top X 1pc
4
Coffee table shelf X 1pc
7
End table leg X 4pcs
HARDWARE LIST / LISTE DE QUINCAILLERIE
A
X 1
B
ALLEN KEY
M6x70mm
Made In Malaysia
ASSEMBLY INSTRUCTION
INSTRUCTION D' ASSEMBLAGE
2
Coffee table leg X 2pcs
5
Coffee table
shelf support X 1pc
8
End table bottom rail X 4pcs
X 24
X 24
D
C
BARREL NUT
CSK SCREW
M6x13mm
X 2
M4x32mm
*Hardware Pack In 195T1104-31
195T1104-31
3pcs Pack Occasional Set
3
Coffee table
bottom rail X 2pcs
6
End table top X 2pcs
9
End table shelf X 2pcs
Pg 1 OF 3

Publicité

loading

Sommaire des Matières pour Fremont & Park 195T1104-31

  • Page 1 End table bottom rail X 4pcs End table shelf X 2pcs HARDWARE LIST / LISTE DE QUINCAILLERIE X 24 X 24 BARREL NUT CSK SCREW ALLEN KEY M6x70mm M6x13mm M4x32mm *Hardware Pack In 195T1104-31 Made In Malaysia Pg 1 OF 3...
  • Page 2 *DO NOT TIGHTEN BOLTS UNTIL COMPLETELY ASSEMBLED. *NES PAS SERRER LES BOULONS JUSQU'A CE QUE LE MONTAGE SOIT COMPLETMENT TERMINE. Made In Malaysia...
  • Page 3 Made In Malaysia...