Eneo VCQ-6057 Serie Mode D'emploi page 6

Quadravision noir/blanc et couleur
Table des Matières

Publicité

(13) Videoausgang
BNC-Ausgangs-Buchsen zum Duchschleifen der Kamerasignale zu anderen
Geräten.
(15) VCR-Eingang (VCR IN)
BNC-Buchse für den Anschluss des Videorecorder-Ausganges. Dies ermöglicht
das Anzeigen und Programmieren des Menüs eines angeschlossenen Video-
rekorders.
Durch Betätigen der Taste (3) auf der Frontseite, schaltet man die Geräte auf die
Betriebsart „VCR-Wiedergabe" um.
(16) VCR-Ausgang (VCR OUT)
BNC-Buchse für den Anschluss des Videorekorder-Einganges. Es werden immer
alle 4 Kameras aufgezeichnet. Die Aufzeichnung wird von der Bildwahl über die
Fronttastatur nicht beeinflusst.
(17) Monitor-Ausgang (LIVE)
BNC-Buchse für den Anschluss an einen Monitor-Eingang zur Wiedergabe von
Live-Bildern. Die Live-Bilder können als Quadbild, Vollbild oder in sequenzieller
Darstellung erfolgen.
(12) Video IN Connectors
These BNC connectors are used to connect to the video out from camera. Total
four cameras can be connected to form a quad screen in the following mapping
position. It is very important that each camera be correctly terminated. Please
refer to Termination (#) for proper impedance setting for each video in
connector.


3
4
(13) Video Out
Video out loop through connectors: These connectors are used to loop video
signals from each camera out to other devices.
(15) VCR In
This BNC connector is to be connected to the „video out" from your VCR.
A pre-recorded quad screen video can be played back from the VCR and pass
through to be displayed on the Monitor out (17) from this unit. This connector
also allows user to display and program the on screen menu of the connected
VCR without reconnecting the cables.
(16) VCR Out
This BNC connector is to be connected to the „video in" from your VCR.
It will only provide a quad screen video to ensure an un-interrupted video
recording for all four cameras. The display video is not affected by the control
panel and alarm status of the unit.
(17) Monitor Out
This BNC connector is to be connected to the „video in" of your monitor. It
displays live video from camera inputs under live mode and playback video from
VCR under VCR mode. The live video displayed here can be in quad screen, full
screen, and auto sequencing mode depending on the operation.
6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vbq-6045 sérieVcq-6057Vbq-6045

Table des Matières