Kygo A6/500 Mode D'emploi page 6

E N G L I S H
General Function
Operation LED status
Power on Blue LED flashes twice
Power off Red LED flashes twice
Pairing Blue LED and Red LED flash alternately
Standby Blue LED flashes 3 times in 5 seconds
Incoming call Blue LED flashes continuously
Low battery Red LED flashes twice every 2 seconds
Red LED stays lit during charging
Charging
Blue LED stays lit when charging is completed
8
All manuals and user guides at all-guides.com
E N G L I S H
Basic Buttons Operation
Power on: Press the multi-functional button for 2 seconds. When the blue
LED flashes twice, headphones are turned on.
Power off: Press the multi-functional button for 3 seconds. When the red
LED flashes twice and then stops, headphones are turned off.
Pairing: Press the multi-functional button for 5 seconds, the blue LED and
the red LED flash alternately.
Increase volume: Press on the "+"button.. When volume reaches
maximum, you will hear a "tick" sound.
Decrease volume: Press on the "-" button. When volume reaches
minimum, you will hear a "tick" sound.
Play/Pause: Short press the MFB to pause music. Press again to resume.
Previous song: Press and hold the "-" button.
Next song: Press and hold the"+" button.
9