AMBIANCE BAIN CONCEPT KETTY DUO Notice De Montage page 12

6. Fix the unit on the wall
1
1 Hang the unit on the wall plates
7. Fasten furniture together with the assembly bolts « 0248 and 0250 »
8. Install the overflow provided
CAUTION:
Tighten only by hand
Do not forget the seals
9. Apply silicone on top and side of unit
10. Install the SMO top on the unit
Toutes les infos sont téléchargeables sur
NOTICE DE MONTAGE
FITTING ASSEMBLY
2 Tighten the brackets on the unit so that
the furniture fits to the wall and adjust the
levels
TIP:
Do not place the tray on the wall until it has been placed on the furniture to avoid
touching the silicone on the wall when lowering the tray.
www.ambiancebain.com
1 Set up the overflow
2
Screw overflow ring with the
key provided
ou www.ambiancebain.co.uk
C156V1.1
3. Fix the brackets
to the wall (screws
and wall plug not
provided)