Publicité
Les langues disponibles
Les langues disponibles
INTRODUCTION
GB
Thank you for deciding to purchase the Kettle Tipper from Aidapt. The Kettle Tipper is
manufactured from the finest materials and components available. When used correctly it is
designed to give many years of reliable trouble-free service.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments as this may damage
the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault, do not use your
product, but contact your supplier for support.
INSTRUCTIONS FOR USE
Using the Kettle Tipper is simple:
• Position the upright kettle against the round wire frame and use the fixing strap to secure the kettle
below the handle.
• The wire frame design means that your cup can be placed as near as required to the kettle.
• Tip the kettle towards the cup using the handle, but allowing the Kettle Tipper to take the weight of the
kettle.
• Gently return the kettle to the upright position, allowing the Kettle Tipper to take the weight of the kettle.
• The kettle will return to its upright position when released due to the Kettle Tipper's raised pivot point,
which prevents spillage.
CLEANING
Clean your Kettle Tipper using a non-abrasive cleaner or mild detergent with a soft cloth. Abrasive
cleaners e.g. AJAX and/ or abrasive cleaning pads may damage the product beyond repair and should
not be used. Always ensure that you wipe dry the equipment after cleaning.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components for their
safety.
This includes:
• Tightness of all nuts/ bolts/castors
• Other screw in/ bolt in/ push in components.
IF IN ANY DOUBT, PLEASE DO NOT ISSUE OR USE, BUT IMMEDIATELY CONTACT YOUR
SUPPLIER FOR SERVICE SUPPORT.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part of or establishing any
contractual or other commitment by Aidapt Bathrooms Limited, Aidapt (Wales) Ltd or its agents or its
subsidiaries and no warranty or representation concerning the information is given.
Please exercise common sense and do not take any unnecessary risks when using this product; as the
user you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the manufacturer (detailed
below) if you have any queries concerning the
assembly/use of your product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: +44 (0) 1744 745 020 • Fax: +44 (0) 1744 745 001 • Web: www.aidapt.com
Email: accounts@aidapt.co.uk • adaptations@aidapt.co.uk • sales@aidapt.co.uk
Fixing and Maintenance Instructions
2
Publicité
