Software Settings - Titanwolf 302645 Mode D'emploi

Now follow the instructions of the installation wizard to carry out the installation
properly.
Once the process is completed, you can stop the installation program by clicking on
"Finish". The software is now fully installed and can be used immediately.

5. Software settings

You have the option of carrying out many settings in the configuration software
of the gaming mouse. Six freely configurable profiles are available, which you can
choose from using the software under the menu item "Config". Additional infor-
mation about the setting options are given below which are profile-independent
and relate to a specific profile, and are suitable for creating macros.
5.1 General profile settings
• Info ("?"): Info panel with software version and homepage
• Reset All: It is possible to reset the settings of the current profile
back to the factory settings using the "Reset" button.
5.2 Configuring the profiles
The options, which are explained in detail below, can be individually configured
and saved for each of the profiles. Select a profile using the mouse in the "CON-
FIG" menu (bottom left of the software) or create a new profile. You can store up
to 6 profiles.
To configure a new profile, click on "New" and select a profile name by editing
the profile with a double click. Close the configuration screen using the "X" in the
profile window. Make the desired profile settings and confirm using the "Apply"
button.
To change profiles, click on the "CONFIG" button and then click on the desired
profile. You can load the profile by selecting it, closing the profile window using
"X" and clicking on "Apply".
16
English