System Setup - Sylvania SDVD1035BT Mode D'emploi

SYSTEM SETUP

In Video Setup Page:
1. If "Panel Quality" is selected, using the Direction and OK Buttons to set the panel quality such as
Sharpness; Brightness; Contrast; Hue or Saturation as desired.
2. If "AV Out Quality" is selected, using the Direction and OK Buttons to set the
Contrast; Gamma; Hue or Saturation
In Preference Setup Page:
NOTE: Preference Page can be openned only when no disc in disc compartment. NOTE: Preference Page can be openned only when no disc in disc compartment.
1. If TV Type is selected, using the Di
(NOTE: The TV system in USA, Canada and Mexico is NTSC.)
2. If Audio, Subtitle or Disc Menu is selected, using the Direction and OK buttons to the priority
of the available language.
3. If Parental is selected, using the Direction and OK Buttons to set the rating level as desire as follow:
Press the ►
~
Button to enter, the rating level list will appear.
Press the ▲ or ▼
~
~ Press the OK Button to enter, password enter window will pop up.
~ Enter the four digit password ( default password is 0000 ) by pressing the Numeric Buttons.
~ Press the OK Button to save the settings and exit.
~ Rate levels:
1 (Kid Saf ): Kid safe
2 (G): All ages
3 (PG): Parental Guidance
4 (Pg 13): Parental Guidance less than 13 years old
5 (Pgr): Under 17 years old, Parental Guidance suggested
6 (R): Under 17 years old, Parental Guidance strongly suggested
7 (Nc 17): 17 years old or above
8 (Adult): Adult only
4. If Password is selected, press the
~ If Password Mode is selected, using the Direction and
rating level setting) or
~ If Password is selected, press the
will appear.
~ Enter the four digit old password.
~ Enter the new four digit password. The Column of Confirm Pwd will be highlighted.
~ Enter the new password again. OK Button
Press the OK Button to save the setting and exit.
5. If Default is selected, using the Direction and
press the SETUP Button to exit without changes.
of the Video output signal
rection and OK
( Function depend the recording of
Button to select the desired level.
Button to enter, the subsetting
OK
Off (Password is needed).
OK Button twice to enter. The
The Colum of New Password will be highlighted.
on the screen
OK
20
Sharpness; Brightness;
as desired.
Buttons to set to PAL, AUTO or NTSC.
DVD).
menu will appear.
OK
buttons to set it On (activate the
New password setting menu
will be highlighted.
Buttons to reset all setting to default setting or
数字签名
人 lxy
日期：
2017.09.3
0 08:42:03
+08'00'