Equipment Maintenance And Repairs; Overview; Equipment Maintenance; Equipment Repairs - Cristec YPOWER Série Manuel D'utilisation

Masquer les pouces Voir aussi pour YPOWER Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4

EQUIPMENT MAINTENANCE AND REPAIRS

4.1
O
VERVIEW
This paragraph deals with equipment maintenance and repairs. Proper operation of the product and its service life are
dependent on strict compliance with the following recommendations.
4.2
E
QUIPMENT MAINTENANCE
Disconnect the battery charger from the AC network and the batteries before starting any maintenance work.
If appliances are in a dusty atmosphere, vacuum-clean them regularly, since dust deposits may adversely affect heat
dissipation.
Check the state of battery charge every 3 months.
Nuts and screws should be tightened annually to ensure efficient operation of the appliance (particularly in rugged
conditions: vibrations, shocks, high variations in temperature etc.).
4.3
E
QUIPMENT REPAIRS
Disconnect the shore power unit from the AC power network and disconnect the batteries before undertaking any
repairs.
When fuses have blown, only use fuses of the type and size recommended in this manual.
Please contact CRISTEC or their distributor for any other repairs.
Any repair without CRISTEC prior agreement entails an exclusion of warranty.
39

Publicité

Chapitres

Table des Matières
loading

Produits Connexes pour Cristec YPOWER Série

Table des Matières