Adjusting The Resistance; Charging Your Cubii Elliptical - Cubii Total Body Plus Manuel D'instructions

IV. Using Your Cubii Total Body+

Adjusting the Resistance

Cubii Total Body+ has 12 resistance levels.
Adjust your workout intensity by pressing
the plus (+) or minus (-) button on the built-in
display monitor, or via the Cubii app. Level
1 is the lowest intensity and level 12 is the
highest. We recommend you begin at
Level 1 and increase the intensity gradually
over time.
Using the Resistance Handle
Before using, firmly grasp the handles and place your feet on the
pedals or the base plate of your Total Body+ elliptical. Pull the handles
up and out of the elliptical to a neutral position, and begin your
exercise routine. Once finished, return the handles to their resting
position on the elliptical body.

CHARGING YOUR CUBII ELLIPTICAL

Step 1 — Connect Wall Adapter
Connect charging cable to wall adapter
and ensure wall adapter is plugged into
power source.
Step 2 – Locate Charging Socket
Locate the charging port on your Cubii elliptical
and plug in the cable.
Step 3 – Check Display for
Charging Symbol
Once the charging cable is plugged in and
charging your elliptical, the screen will power
on and the lightning bolt symbol will flash to
indicate the charge in progress. The lightning
bolt symbol will remain solid when it is
fully charged.
10