KREAFUNK aHEAD Manuel D'utilisation page 10

computer and ensure that the
Bluetooth function is enabled.
• Turn on the device and go to
pairing mode.
• Open the Bluetooth software
(for example Blue Soleil)
installed on your computer,
and select 'Search your
Bluetooth devices' function.
Refer to the user manual
associated with the Bluetooth
software if more information
is needed.
• After a few seconds the
device name will be listed on
your computer, it will be listed
as a discover device. Select
the icon and right-click on
your mouse to select 'Pairing'.
Right-click again to select
'Connect with Audio Device'.
• Open your media player
software on your computer
to play music, watch TV and/
or movies and play games. All
the sound will now be coming
from your aHEAD Bluetooth
Headphones.
10
3.3. Charging your aHEAD
Bluetooth Headphones
These headphones use USB to
Micro USB charger. It is convenient
to connect to an AC charger or
a USB charger. Ensure that your
device is fully charged for at least
6 hours when using it the first
time. To charge insert one terminal
of your charger to an AC or PC
USB port and connect the other
end to the Headphones. When
charging the red LED light will
show constantly, when charging is
complet ed, the red LED light will
turn off and replaced by a blue
LED light.
WARNING
• You must select a qualified
charger from a regular
manufacturer.
• You must charge the aHEAD
Bluetooth Headphones if it
has not been used for more
than 12 months.
English