numskull Batch SYET0318 Mode D'emploi page 2

INSTRUCTIONS
1. Ensure your console is switched off, then insert the USB
into the charging port on the console.
2. Insert the mains charger into the cigarette lighter socket.
This will fit most makes and models of vehicle that have a
standard 12V socket.
3. A power indicator LED will light up indicating that your
console is charging. You can play games on your console
during charging, but this will lengthen the time it takes to
recharge the battery.
4. The recharge indicator LED will turn off when the battery
is fully charged. Disconnect the mains charger before
removing the USB from your console.
5. When console power is at 0% the car charger will not work.
Please connect to 15V mains charger to boot power, then
connect the car charger after 15 minutes.
All manuals and user guides at all-guides.com