Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
Dummy Dome Camera
Item No. 1717532
Intended use
The product looks deceptively similar to a functional surveillance camera and therefore, it
can be used for deterrence in secluded or critical areas (e.g. driveways, entrance areas,
shops etc.).
The dummy dome camera is designed for installation and use indoors, it must not get wet or
damp.
The camera features an activation light.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, or other hazards. Read the instructions
carefully and store them in a safe place. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements.
All company names and product names are trademarks of their respective owners. All rights
reserved.
Delivery content
• Dummy camera
• Installation material
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Safety instructions
Please read the operating instructions carefully and pay particular attention to
the safety instructions. We do not assume liability for injuries/material
damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper handling of
the product. Furthermore, in such cases, the warranty/guarantee will be null
and void.
a) General information
• The product is not a toy. Keep out of the reach of children and pets.
• Do not leave packing materials unattended. It may become a dangerous plaything
for children.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations,
high humidity, moisture, combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• Please handle the product carefully. It can be damaged by impact, blows, or by
being dropped, even from a low height.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) (Rechargeable) batteries
• Correct polarity must be observed while inserting (rechargeable) batteries.
• The (rechargeable) batteries should be removed from the device if it is not used
for a long period of time to avoid damage through leaking. Leaking or damaged
(rechargeable) batteries might cause acid burns when in contact with skin,
therefore use suitable protective gloves to handle corrupted (rechargeable)
batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave
(rechargeable) batteries lying around, as there is risk, that children or pets swallow
them.
• All (rechargeable) batteries should be replaced at the same time. Mixing old and
new (rechargeable) batteries in the device can lead to (rechargeable) battery
leakage and device damage.
• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into fire.
Never recharge non-rechargeable batteries. There is a risk of explosion!
All manuals and user guides at all-guides.com
Installation
1. Select a suitable mounting location for the dummy dome camera. During installation keep
2. Screw the dummy dome camera firmly to the mounting surface. Use screws and plugs that
• Depending on the surface (level, free of dust and grease), the dummy dome camera can
Inserting/replacing the batteries
1. Lift the battery cover of the battery compartment up.
2. Insert 2 AA batteries into the battery compartment. Make sure to observe the polarity
3. Close the battery cover. Make sure it locks.
Care and cleaning
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
• Clean the product with a dry, fibre-free cloth.
• Do not immerse the product in water.
Disposal
a) Product
b) (Rechargeable) batteries
Used (rechargeable) batteries can be returned to collection points in your municipality, our
stores or wherever (rechargeable) batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply .....................................2 type AA batteries
Operating current ...............................20 mA
Battery life ..........................................approx. 1 year
Operating conditions ..........................-20 to +40 °C, 0 – 95 % RH
Storage conditions .............................-20 to +40 °C, 0 – 95 % RH
Dimensions (Ø x H) ...........................115 x 75 mm
Weight ...............................................98 g
Installation must be carried out by qualified personnel only. Incorrect installation can
result in severe personal injury and property damage.
Please make sure that existing cables or wiring are not damaged when drilling/
screwing into place. Use an electronic stud finder before drilling and mounting.
the desired alignment of the camera opening in mind.
are suitable for the surface.
also be attached with double-sided adhesive tape. Ensure the tape can support the weight
of the camera.
indications in the battery compartment.
- A battery change is necessary when the LED lights up only weakly or does not light at all.
they can cause damage to the housing and malfunctioning.
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
Remove any inserted (rechargeable) batteries and dispose of them separately from
the product.
You as the end user are required by law (Battery Ordinance) to return all used
(rechargeable) batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labeled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals
involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
*1717532_v1_1018_02_m_sgs_en_(2)
Publicité
