Operating Modes - AVM FRITZ!Repeater 3000 Configuration Et Fonctionnement

FRITZ!Repeater 3000
This quick introduction shows you the
possibilities for deploying and operating
your FRITZ!Repeater 3000. Comprehen-
sive information and technical details are
presented in the PDF manual available on
our website en.avm.de/service.
The FRITZ! Repeater 3000 is a wireless
repeater that extends the range of your
wireless network. Computers, tablets,
Smart TV and other wireless devices can
use the FRITZ!Repeater 3000 as the ac-
cess point to your internet router and the
home network. In the FRITZ!Box home net-
work, the FRITZ!Repeater 3000 automati-
cally adopts the FRITZ!Box's settings. With
a Mesh-enabled FRITZ!Box you also benefi t
from more convenience and optimized
wireless LAN performance. More detailed
information about the benefi ts and the
confi guration of Mesh WiFi is presented at
en.avm.de/mesh-networking.
The FRITZ!Repeater 3000 comes with a
user interface which you can open in a
web browser on all connected devices.
Have fun with your FRITZ!Repeater 3000!
6
Security
 Operate the FRITZ! Repeater 3000 in
a dry place that is free of dust and
protected from direct sunlight, and
provide for suffi cient ventilation.
 The FRITZ!Repeater 3000 is intended
for indoor use only. Never let liquids
get inside the housing.
 Connect the FRITZ!Repeater 3000 to
an easily accessible outlet.
 Do not open the FRITZ!Repeater 3000
housing. Opening and/or repairing the
device can present a hazard.
Unplug the FRITZ!Repeater 3000 from

the outlet before cleaning. Clean the
device using a moist cloth.

Operating Modes

The FRITZ!Repeater 3000 can work in two diff erent operating modes:
Wireless Bridge (Preset)
The wireless bridge connects the
FRITZ!Repeater 3000 with your internet
router via wireless LAN. Computers and
other network devices are connected to
the FRITZ!Repeater 3000 via wireless LAN
or with a LAN cable.
Wireless
LAN
Wireless
LAN
1
FON
LAN
LAN Bridge
The LAN bridge connects the FRITZ!Re-
peater 3000 with your internet router
using a LAN cable. Computers and other
network devices are connected with the
FRITZ!Repeater 3000 via wireless LAN.
The LAN bridge operating mode can be
confi gured in the user interface of the
FRITZ!Repeater 3000. For more informa-
tion, see also the FRITZ!Repeater 3000
manual at en.avm.de/service.
Wireless
LAN
LAN
FON 1
7