Table des Matières
Publicité
Using the Control Panel
Use your appliance according to the following control regulations, your appliance has the corresponding
functions and modes as the control panels showed in the pictures below. When the appliance is powered
on for the first time, the backlighting of the icons on display panel starts working. If no buttons have
been pressed and the doors are closed, the backlighting will turn off.
TEMPERATURE SELECTION
We recommend that when you start your refrigerator for the first time, the temperature for the
refrigerator is set to 4°C and the freezer to -18°C. If you want to change the temperature, follow the
instructions below.
Caution! When you set a temperature, you set an average temperature for the whole refrigerator
cabinet. Temperatures inside each compartment may vary from the temperature values displayed on the
panel, depending on how much food you store and where you place them. Ambient temperature may
also affect the actual temperature inside the appliance.
Fridge
Press "Fridge" to set fridge temperature between 2°C and 8°C as needed, and control panel will display
corresponding values according to the following sequence.
Freezer
Press "Freezer' to set freezer temperature between -14°C and -24°C as needed, and the control panel
will display corresponding value according to the following sequence.
5
ERFF111BL
Publicité
Table des Matières
