KREAFUNK aGLOW Manuel D'utilisation page 17

Below are two ways to charge
aGLOW:
1. First option: When aGLOW is
low on power, connect it to a
USB power source, with the
included USB to micro USB
cable. The lamp will flash white
twice to indicate charging has
begun
2. Second option: aGLOW supports
wireless charging meaning
it is compatible with a Qi
charger. Turn on your wireless
Qi charger and place aGLOW
on top. aGLOW will flash white
twice to indicate charging has
begun
The LED ring turns red, orange or
green to show different charging
statuses:
• red = power is below 15%
• orange = power between 15%
and 100%
• green = fully charged, you can
disconnect charging
English
17