HoMedics UV CLEAN SAN-W100 Manuel D'instruction Et Information Sur La Garantie page 7

CHARGING YOUR PORTABLE SANITIZER WAND
Charging takes 2-3 hours for a full charge.
•
To charge your wand, use the included charging cable. Plug the small end
(micro USB) into the charging port, beneath the protective cover. Plug the
USB end into a computer or USB wall charger.
•
The power icon of the wand will show flashing green when charging.
•
When the wand is fully charged, the LED will turn solid green.
•
One full charge will give you 30 sanitizing cycles.
LED INDICATORS
•
Solid red
•
Flashing red for
3 seconds
•
Solid green
•
Flashing blue
•
Flashing green
•
Alternating red
and blue flashing
for 3 seconds
•
At the end of the sanitizing cycle, solid red for 3 seconds and
then off: 20%-30% battery left and can sanitize
•
Solid red for 3 seconds when the power button is pressed: <20%
battery left and cannot sanitize
•
Both side buttons are not pressed in
•
Fully charged
•
In sanitizing mode
•
Charging
•
UV-C LED malfunction
7