Charging Battery - Roadstar TRA-130D+ Manuel D'instructions

1 English
LOCATION OF CONTROLS
1. LCD DISPLAY
2. POWER ON - OFF / MODE
- PRESS BRIEFLY TO POWER ON
- PRESS AND HOLD TO POWER OFF
- WHEN THE RADIO IS ON, PRESS TO SELECT BETWEEN DAB AND FM
3. INFO / SLEEP
- PRESS REPEATEDLY TO VIEW VARIOUS INFO
- PRESS AND HOLD TO ENTER THE SETTING OF SLEEP TIMER
4. SCAN / PRESET
- PRESS AND HOLD TO START THE RADIO SCAN
- PRESS TO ENTER PRESET MENU
5. ENTER
6. VOLUME -
7. VOLUME +
8. CHANNEL -
9. CHANNEL +
10. SPEAKER
11. ANTENNA
12. USB CHARGING PORT (FOR CHARGING BUILT-IN BATTERY)
13. LED INDICATOR (FOR BATTERY CHARGING)
14. EARPHONE OUT
PRECAUTIONS
The radio should not be used in a high temperature or high humidity environment

over prolonged periods of time as this may damage the unit.
Keep the radio away from liquids as it may get damaged. Please switch off the

radio immediately if water or liquids is spilled into the radio. Consult with the shop
you bought this radio for any question.
Avoid using or storing the unit in dusty or sandy environment.

Do not open and repair the radio by yourself.

Use only the specified power input voltage to charge the battery. Connecting a

power supply with a different rating will cause permanent damage to the radio
and may be hazardous.
Clean only with dry cloth.


CHARGING BATTERY

The radio is powered by the built-in lithium battery. (An USB charging cable is sup-
plied in the product package).
To check the battery level, when the radio is on, press repeatedly the [Info/Sleep] but-
ton (3) until you see the battery indicator on the bottom right of the display.
When battery power is low, it will prompt with message "Battery Low" to remind for
battery charging.