Télécharger Imprimer la page

Stylish ASTI K-145 Guide Rapide page 2

Publicité

Les langues disponibles

Les langues disponibles

1
ADJUSTABLE
RING
Loose pot-filler base screw using
a 2 mm allen key.
5
7
Aligning dowel screw with
pot-filler base hole (as shown in
diagram) connect pot-filler arm.
Clean the faucet frequently using mild soap or an on-abrasive cleaner and then quickly rinse with water and dry with soft cloth only.
Using abrasive cleaners, solvents, acid cleaners or any scrubbing detergent, polisher or scraper will damage the finish and void the
warranty.
Stylish International Inc.
Products and specifications shown are subject to change without notice. Please contact our technical support at care@stylishkb.com for any further queries, replacement parts requests, etc. ©2021 Stylish ® all right reserved.
2
Detach pot-filler base from the
arms.
Position pot filler base with
handle and connector in
vertical direction.
8
Secure pot-filler dowel screw.
Follow us on Instagram! Check out and let us know your comments
3
Place Teflon on the pipe thread
area being inserted into the
rough-in receiver (1/2 inch
female NPT).
6
9
CLOSED
With both pot-filler handles in
close position, open water
supply.
CARE AND CLEANING
ASTI
K-145
POT FILLER
4
WALL
Insert and thread the pot-filler
nipple into rough-in.
This pot-filler has an adjustable
ring at the base that is used to
tighten the pot-filler, the
decorative cover is optional and
can allow extra 6mm of
engagement if needed, adjust
the ring until pot filler is firmly
positioned.
10
OPEN
CLOSED
Confirm pot-filler operation,
check for any leak.
TOLL
FREE
stylish.international.inc
DECORATIVE
COVER
OPEN
Page 2/4

Publicité

loading