babymoov Visio Care 2 Notice D'utilisation page 18

11. The parents are also able to see the image of their baby while he is sleeping (that is to say while he stays quiet).
Press the camera remote control button (21) to turn the camera on; the camera (20) functioning light comes on
red. The image of the baby then appears on the screen (17). Press the camera remote control button (21) again
to switch the camera off: the screen (17) and the camera (20) functioning light then go off also.
12. The transmitter is equipped with an automatic night vision function. Every time the luminosity level sensor (5)
detects that the level of light intensity is low in the baby's room it automatically switches over to the infrared LEDs
(7) to use them as a lighting source. The camera lens (6) captures the infrared images of the baby and transmits
them to the receiver which then displays them on the screen (17) in the form of a black and white image.
13. The parents can respond to the child every time they want to by using the "Respond to baby" button
- Press the "Talk" (23) button and keep it down.
- Speak into the microphone (22).
- Your voice will be heard in the loudspeaker (9).
- Adjust the output sound volume by using the volume adjustment system (4).
- Then release the "Talk" button to listen.
If you have a USB cable you can diffuse the babyphone's image on the screen of your computer.
1. Switch on the receiver and the transmitter; make sure the image captured by the camera appears on the screen
(17) of the receiver before connecting it to the PC via the USB cable.
2. Once the connection with the PC is secure the camera's (20) functioning light comes on after about 3 to 10 seconds
to signal the connection is effective.
3. The VOX mode does not function during the connection to the PC; in this case the transmitter will stay continuously
activated. (That is to say the image of the baby can be seen on the computer's screen even when the baby is
quiet). Moreover, the camera (21) remote control button will not be functional.
4. For the PCs that function on Windows XP version 2.0 or on a succeeding version the image can be displayed on
the PC without the need to install any driver. For the PCs functioning on Windows 7 it is necessary to install the
software AMCap (www.noeld.com/programs.asp?cat=video#AMCap) to display the image on the PC.
5. Click on the icon AMCap on the office
after installing the software AMCap. (see
fig.1 and 2)
N.B. If the window displayed on the PC's screen is black please close the window and wait for 3 to 5 seconds before
trying again.
To see the image on another PC via internet
It is possible to use the function Remote Desktop (available on Windows)
or install a remote access programme such as Teamviewer
(www.teamviewer.com/en/download/index.aspx). The details on how to
implement it can be found on the associated web site.
CONNECTION TO A PC
BABYPHONE VISIO CARE 2 • Instruction manual
19