Safety Information; Preparation - Project Source 67210-0201 Mode D'emploi

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate, or install
the product.
WARNING
• Follow the installation instructions carefully. Proper installation is the installer's responsibility.
• Failure to follow correct installation procedures can result in the faucet being loose, which can
result in serious injury.
CAUTION
• Check local building codes before you begin installation to ensure compliance.

PREPARATION

Before beginning the assembly of this product, make sure all parts are present. Compare parts with
the package contents list. If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
Estimated Assembly Time: 45 minutes (including removal of old faucet)
Tools Required for Assembly (not included): Adjustable Wrench, Phillips Screwdriver, Silicone
Sealant, Allen Wrench
Helpful Tools (not included): Basin Wrench, Water Supply Lines
ASSEMBLY INSTRUCTIONS
1. Shut off the water supply and remove the
old faucet.
1
3