Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
Thank you for purchasing a DVI Lighting Product, we
hope that it's timeless style and grace will create an
enjoyable environment for you in the years to come.
Here are a few things to note before you install your light.
1.Please save these instructions for the future.
2.To install this fixture you will need a Phillips head
screwdriver
3.After you unpack your fixture, ensure that you have
all of the parts necessary for the successful installation
of this product. If something seems to be missing, first
look through all of the packing material. We suggest
that you keep all of the packaging until the light is
properly installed.
WARNING: RISK OF FIRE AND ELECTRIC SHOCK. THIS
PRODUCT IS TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN ONLY. WIRE IN ACCORDANCE WITH
NATIONAL AND LOCAL ELECTRICAL CODES.
Assembly Instructions
1. Attach the back plate to the electrical box.
2. Using the supplied wire connectors, connect the wires in the following order:
A:Copper ground wire to Ground Wire - If you only have two wires coming from the electrical box, connect
the fixture's copper wire to the Green ground screw on the crossbar or ground screw in the electrical box.
B:White Fixture Wire to White Supply Wire.
C:Black Fixture Wire to Black Supply Wire.
3. Place the fixture front plate over the screws, and attach thumb nut finials to hold the fixture in place.
120 Great Gulf Drive,
Concord Ontario,
L4K 5W1 Canada
Tel: (905) 660 5600
Fax: (905) 660 5714
AMETHYST
DVP6301, wall light
after you install your light
1.Make sure to note the maximum recommended
wattage for your light fixture - DO NOT EXCEED THE
RECOMMENDED WATTAGE. The sockets on these
fixtures are rated to 75 Watts G9 halogen bulbs.
2.To clean your Fixture, we recommend that you use a
mild detergent, such as dish washing soap, and warm
water to clean the glass and metal surfaces. Use a damp
soft cloth to wipe off dust.
DO NOT USE abrasive pads or cleaning materials.
front plate
thumb nut finials
back plate
Page 1
ground screw
ground wire
Publicité
Manuels Connexes pour DVI Lighting AMETHYST DVP6301
Sommaire des Matières pour DVI Lighting AMETHYST DVP6301
- Page 1 AMETHYST Thank you for purchasing a DVI Lighting Product, we hope that it's timeless style and grace will create an DVP6301, wall light enjoyable environment for you in the years to come. after you install your light Here are a few things to note before you install your light.
- Page 2 AMETHYST wall light DVP6301, crystal chain B chaîne de cristal B upper canopy crystal chain A la canopée chaîne de cristal A Assembly Instructions 4. Attach the crystal chains into the holes of upper canopy. Start with crystal chain A and then attach crystal chain B. Continue attaching chains all around upper canopy, always alternating chains A and B.
- Page 3 AMETHYST Nous vous remercions d’avoir acheté un produit d’éclairage DVI et espérons que vous en apprécierez la pureté du style et l’élégance. aplique DVP6301, Lisez les quelques conseils suivants avant de commencer après avoir installé votre luminaire l’installation de la lampe : 1.
- Page 4 AMETHYST aplique DVP6301, crystal chain B chaîne de cristal B upper canopy crystal chain A la canopée chaîne de cristal A Assembly Instructions 4. Attachez les chaînes de cristal dans les trous du couvert supérieur. Commencez avec la chaîne cristal A, puis fixez la chaîne de cristal B. Continuer la fixation des chaînes partout supérieure de la canopée, toujours en alternance chaînes A et B.