Télécharger Imprimer la page

Fortin EVO ONE Schéma D'installation page 7

Installation régulière & thar-one-toy14. addenda - schéma de branchement suggéré pour toyota corolla h-key 2020-2022
Masquer les pouces Voir aussi pour EVO ONE:

Publicité

This guide may change without notice. See www.fortin.ca for latest version.
Ce guide peut faire l'objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
DCRYPTOR PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION AVEC DCRYPTOR
Parts required (not included)
FLASH LINK UPDATER
1x
FLASH LINK
1x
SOFTWARE | PROGRAMME
Microsoft Windows Computer with Internet connection
1 x
Ordinateur Microsoft Windows avec connection Internet
BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE. | AVANT LA PROGRAMMATION CONFIGURER LES OPTIONS DE L'UNITÉ ET SAUVEGARDER.
1
x1
HOLD
2
RELEASE
3
4
TURN
ON/RUN
5
TURN
START
Pièces requises (non incluses)
,
MANAGER
BLUE
ON
BLEU
IGNITION
IGNITION
OFF
ON
ON
FLASH
RAPIDLY
ON
WAIT
IGNI.
START
OFF
ON
CONTINUED NEXT PAGE | CONTINUEZ À LA PAGE SUIVANTE
FLASH LINK
1x
FLASH LINK
1x
OR
OU
Smartphone Android or iOS with Internet connection
(Internet provider charges may apply)
1 x
Téléphone Intelligent Android ou iOS avec connection
Internet
(des frais du fournisseur Internet peuvent s'appliquer)
Press and hold the
programming button:
Connect the 6-PIN Main
harness (White connector).
 The LEDs will alternate
between BLUE, RED,YELLOW
& BLUE/RED flashes.
Release the programming
button when the LED is BLUE.
If the BLUE LED is not ON solid
disconnect the 6-Pin Main
connector and go back to step 1.
Insert the required remaining
connectors.
Turn the key to the
Ignition ON/RUN position.
The BLUE LED will flash
rapidly.
Wait,
 The BLUE LED will turn ON
solide.
Start the vehicle.
 The BLUE LED will turn OFF.
 The RED LED will turn ON.
ON
MOBILE
MOBILE APP
Appuyez et maintenir le bouton
de programmation enfoncé:
Branchez le harnais Principal à
6-Pins (connecteur Blanc)
 Les DELS alterneront entre
un clignotement BLEU,
ROUGE, JAUNE &
BLEU/ROUGE
Relâchez le bouton de
programmation quand la DEL
est BLEU.
Si la DEL BLEUE n'est pas
allumée débranchez le
connecteur Principal à
6-broches et retournez au
début de l'étape 1.
Insérez les connecteurs
requis restants.
Tournez la clé à Ignition.
La DEL BLEU clignotera
rapidement.
Attendez,
 La DEL BLEU s'allume.
Démarrez le véhicule.
 La DEL BLEU s'éteint.
 La DEL ROUGE s'allume.
7 / 11
Page

Publicité

loading

Ce manuel est également adapté pour:

Evo-one