Publicité
Les langues disponibles
Les langues disponibles
Noise in the mixing bowl when
working (the accessory scraped
2
the bowl)
The pot cover doesn't fit the
3
mixing bowl properly
The machine doesn't work on
4
certain speed
Movements when the machine
5
working
The rise button didn't spring back
in place after installing the mixing
6
bowl and pot cover
Cleaning
Before cleaning remove the mains lead from the socket.
Never immerse the housing with motor in water!
Do not use any sharp or abrasive detergents.
Motor Housing
Only a damp rinsing cloth should be used to clean the outside of the housing.
Mixing Bowl, Mixing Equipment
CAUTION:
The components are not suitable for cleaning in a dishwasher. If exposed to
heat or caustic cleaners they might become misshapen or discolored.
Components that have come into contact with food can be cleaned in soapy water.
Allow the parts to dry thoroughly before reassembling the device.
REMOVAL OF APPLIANCES USED
Directive 2012/19/EU on waste electrical and electronic Equipment (WEEE)
requires that the appliance uses are not disposed of using the normal municipal
waste. Old appliances must be collected separately in order to optimize the
recovery and recycling of materials they contain and reduce the impact on
human health and the environment.
The symbol of the dustbin is used on all products to remind the obligations for separate
collection. Consumers should contact their local authorities or dealer regarding the steps to
follow for the removal of their old appliance. If you proceed with the scrapping of old
equipment, be sure to render useless what could be dangerous: disconnect the power cable
flush with the device.
Danger:
·Check if the mixing bowl is properly installed.
·Check if the accessory installed properly on
machine.
·Check if the pot cover placed on the machine
properly.
·Check if the mixing bowl installed properly on
machine and locked correctly.
·Check if the mark on speed knob correspond to
the speed silkscreen on housing.
·Rotate speed knob to 0, and re-check if the
machine works.
·Check if the anti-slip feet fall off.
·Check if the machine is placed on a smooth and
flat tabletop.
·Check if the pot cover placed on the machine
properly.
·Check if the mixing bowl is properly installed.
Publicité
