PATONA PT13-1 Mode D'emploi page 14

1. Overview
1.1. Install handlebars
Insert the handlebar and fasten the screws.
1 2
1.2. Unfolding
Press against the button lever, and gently bring the steering column up until it
locks in place. Only pull the steering column after pressing the lever. Pull gently.
1.3. Folding
Press down the lever to fold the E-Scooter. Do not turn the handlebar while you are folding. Keep
it straight. Gently bring the steering column down until it locks in place and use if necessary the
back brake.
13