Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Attaching the rear spoiler, toy wheels and mirrors
Attach the rear spoiler (K) by pushing the two uprights on the rear
16
spoiler into the slots at the back of the car body.
Pull the spoiler upwards to check it is firmly attached - it should not
come off.
Note: Style of spoiler may vary to that shown.
Push the back wheels (G) and front wheels (H) on to the axles at
17
each corner of the car body. Check all wheels have clicked into
place.
Insert the left mirror (I) and right mirror (J) as shown. Check both
18
mirrors are firmly attached by trying to pull them out - they should
not be able to be pulled free.
The play tray
Using a Phillips screwdriver, unscrew the battery cover on the
19
underside of the play tray (L).
Insert 2 x 1.5V AA batteries (not supplied) ensuring the correct
20
battery orientation is observed and then reattach the cover,
replacing the screw, being careful to avoid overtightening.
Place the play tray (L) into the recess on the upper surface of the
21
walker body ensuring it locks into position. To release the play tray
push in the play tray's two tabs on the underside of the walker
and remove the play tray.
7
Publicité
Table des Matières
