8520892
4.
Replace the carbon brush cover and housing cover.
5.
Run the motor for 15 minutes without load to shape the brush, so it is
properly aligned with the commutator.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the
steel parts to avoid rust. Remove the lubricant before using the tool again.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
TROUBLESHOOTING
Contact Princess Auto Ltd. for a solution if the tool does not function properly
or parts are missing. If unable to do so, have a qualified technician service
the tool.
12
120V AC Electric Jackhammer Kit
For technical questions call 1-800-665-8685
V4.5