Safety Instructions; Proper Use - Heitronic 501213 Instructions D'installation Et De Service

GB Installation and Operating Instructions
Transformer
Art. No. 501213
These operating instructions refer exclusively to this product.
They contain important information for the start-up and handling of the transformer.
Therefore pay attention to these operating instructions, even if you pass this product on to third
parties.
It is important, therefore, that these instructions are archived carefully for referring to information at a
later stage.
1. Introduction
Dear customer, thank you for deciding to purchase our product.
You have acquired a product from Vollmer, which has been built according to the current state of technology.
The item fulfils the requirements of effective European and national guidelines
To maintain the condition of the product and to ensure safe operation, you - as the user - must observe the
instructions of this operation manual!

2. Safety Instructions


The guarantee becomes invalid if damage occurs due to the failure of following these operating
instructions!

We do not accept liability for any consequential damage!

Commissioning is strictly prohibited if there are any damages to the product.

Do not allow the transformer to come into contact with extreme heat or naked flames.

The product in its entirety must not be altered or modified. Alterations to the socket strip invalidate the
guarantee.

The type plate must not be removed.

3. Proper Use

The transformer is designed for use in indoor/outdoor areas.
This product may:

only be operated with a voltage of 230V ~50Hz

only be operated when mounted to a sturdy, level and non-tilting surface

only be operated on normal or non-flammable surfaces

not be subjected to strong mechanical loads or heavy soiling.
H. Vollmer GmbH ǀ Allmendring 29 ǀ 75203 Königsbach-Stein ǀ www.HEITRONIC-SHOP.de
3 / 8 08/21