Operating Mode - Dhom Teck Systems FT-30C Manuel De L'utilisateur Et D'entretien

Wrong interventions or tampering will void the warranty and expose the person to danger.
In case of damaged parts or suspect malfunctions, immediately discontinue use and
consult qualified personnel. Regularly check the integrity of the cable. If you need to
replace the power cord, contact the manufacturer or its service agent or equivalent
qualified personnel only in order to avoid dangers. Avoid using an extension. If the latter is
absolutely necessary, contact qualified personnel for the appropriate checks. Do not
intervene alone on the appliance. Wrong interventions or tampering expose the user to
danger. If the blades are blocked, turn off the appliance, unplug the plug and check the
cause of the block. If this cause can not be identified, do not attempt to repair the appliance
yourself, but contact only qualified personnel. Never cover the appliance even when it is
turned off but the plug is plugged into the power outlet. Danger of overheating and fire. Do
not spray other substances on the fan. Disconnect the plug from the socket before
commencing the cleaning operation. Be sure the fan is off before disconnecting the plug
from the power supply. Cleaning operations must be carried out as explained in the
appropriate paragraph. Make sure that the fan is disconnected from the power supply
before performing any operation. If the power cord is damaged, it must be replaced by the
manufacturer or its service technician or any other person with similar qualifications to
prevent any risk. Children should be supervised to make sure they do not play with the
appliance. Do not use this unit connected to programmers, external timers, remote control
systems, timers or any other device that can turn it on automatically.
FIRTS USE
Unplug the appliance from the box and make sure it is firmly sealed in all its parts. Keep
packing materials away from the reach of children as far as possible source of danger.
Make sure that the mains voltage is the same as that shown on the label or in the technical
data.

OPERATING MODE

Plug the plug into the socket. On the front of the body are the keys and the speed control
commands. Select the desired speed. It is possible to change the speed setting during use
without having to turn off the unit.
CLEANING
Before cleaning, make sure that the appliance is switched off and disconnected from the
power outlet. NEVER IMMERSE THE PRODUCT IN WATER OR IN ANY OTHER TYPES
OF LIQUID. DO NOT BATTER THE CABLE AND SPEED. Use a soft, dry cloth to clean the
outside surface. The use of aggressive detergents could ruin the plastic surface. Use
normal neutral detergent. Before using the appliance again, make sure it is completely dry
in all its parts.