Device Installation - Aquila Vizion SMART VIZION PTZ HD 720P Démarrage Rapide

DEVICE INSTALLATION

STEP 1:
Connect the power plug from the camera to the supplied AC adapter.
Then connect the other end to a wall outlet.
Inside
Connect the Ethernet cable to the camera and the other end of the
cable to your Internet router.
Inside
Note:
• Make sure that the Ethernet LED indicator on your camera are lit.
• Make sure that the DHCP function of the router is enabled (This feature is
enabled by default).
• Make sure that your router is connected to internet and your smartphone to a
3G or 4G network.
Outside
Outside
1
16