GGM gastro WG5-A Mode D'emploi page 7

SW
4. Press
5. Place the items to be counted on the platform, after a moment
6. After turning the power off, uit weight of sample size will be
3.2 OVER LOAD
If the weight of objects is over maximum capacity, LCD will show "___", please
remove the object from the platform and refer to the user manual to operate scale
properly.
3.3 LOW BATTERY
Low battery warnings symbol "Lo" will appear on LCD when the battery power is
insufficient. Please replace with new ones to ensure best performance.
3.4 AUTO-OFF FUNCTION
The scale will turn off automatically if not being used for a period of time.
4 CALIBRATION
▪ When the power is off, press and hold
value stabilizes.
▪ Press key again, LCD reads "ZERO", later LCD will show another value "xxxx".
▪ According to the value shown on LCD (Ex. 5000), place the same value calibration
weight (5000g) on the platform.
Press key again, LCD will show "CAL " then "PASS".
▪ Remove the calibration weight from the platform and turn off the power.
5 WARRANTY
This scale is warranted against defects of manufacturing and materials for a period
of 1 year, from the delivery date.
During this period, GIROPÈS SL will take charge of repairing the scale.
This warranty does not cover defects or damaged caused by misuse, overloading
or improper installation contrary to the recommendations described in this manual.
This warranty does not cover shipping costs for the reparation of the balance.
, LCD will show "CAL " first then quantity of sample
pieces placed on the platform. * If the item to be counted is too
light, select a higher quantity to obtain more accurate average.
the display will show the count.
memorized. To measure the same item, turning the scale on
and select "pcs" to start counting operation; to count a different
item, please repeat steps above.
key till LCD shows a value, wait until the
ES / EN /FR / IT / DE