TIMEMORE Grinder Go Manuel De L'utilisateur page 5

NOTICE
Please note that the machine will stop automatically for identifying idling.
After grinding, it will automatically stop after about 10s of idling or about
10s of empty machine start.
When the machine is working for a long time,the power will be cut o if
thermal protector detected overheat, and the co ee grinder will be turn o
after red indicator light is on for about 10s.
Do not shake or hit the machine while it is working to avoid damage to the
motor.
Do not touch the Grinding Degree Regulator with your fingers after the
machine is started to avoid injury.
Do not separate the body and the powder tank during grinding to prevent
the powder from scattering.
The powder tank has a maximum capacity of 60g. Please do not continue
grinding after the powder tank is filled.
This product is not recommended for washing with water. Please use brush
to clean the body daily. It is forbidden to soak the body in water.
Do not disassemble or repair this product by yourself. If the power cord
was damaged, it must be replaced by a professional in order to avoid
danger.
This product uses Type-C charging interface, please adapt 1A/2A charger.
Do not allow children to operate this product. Children should be
supervised to ensure that they do not play with machine.
Store this product in a dry and shaded environment.
The machine is used in homes, o ces and other working environments;
farmhouses; customers in hotels, motels and other residential
environments; bed and breakfast environment.
Please use this product according to the requirements of this manual to
avoid misuse to cause harm to users.