Oceanic OCEAMO20BG Guide D'utilisation page 21

and/or used in the form of electromagnetic radiation for the
treatment of material, and EDM and arc welding equipment.
Class B equipment is equipment suitable for use in domestic
establishments and in establishments directly connected to a
low voltage power supply network which supplies buildings
used for domestic purposes.
35. Be careful not to move rotate the tray when removing the
container from the device.
.INSTALLATION...
1.Take out all the packing. If there is a safe film over the oven,
tear it off before use. Check carefully for damage. If any,
immediately notify dealer or send to the manufacturer's service
center.
2.Microwave
non-corrosiveness environments, kept away from heat and
humidity, such as gas burner or water tank.
3.To ensure sufficient ventilation, the distance of the back of
microwave to the wall should be at least 10 cm, the side to the
wall should be at least 5 cm, the free distance above the top
surface at least 20 cm. the distance of the microwave to the
ground should be at least 85 cm.
4.The position of the oven shall be such that it is far from the TV,
Radio or antenna as picture disturbance, or noise may occur.
The distance should be more than 5m.
5.The appliance must be positioned so that the plug is accessible,
and must ensure a good grounding in case leakage, ground
loop can be formed to avoid electric shock.
6.The microwave oven must be operated with the door closed.
7.The microwave oven must not be placed in a cabinet. The
microwave oven is intended to be used freestanding.
8.As there is manufacturing residue or oil remained on the oven
cavity or heat element, it usually would smell the odor, even a
slight smoke, It is normal case and would not occur after
..................... ................................................
ovens must be placed
19
under dry
...
and