Satco NUVO Lighting 65-072 Manuel D'installation Et D'instructions

INSTALLATION AND SERVICE INSTRUCTIONS
SAFETY INSTRUCTION
1. Read instructions carefully before attempting to install fixture. Retain instruction for future reference.
2. Disconnect power before installing or servicing. This fixture must be wired in accordance with the National Electrical Code
and applicable local codes and ordinances.
3. Proper grounding is required to ensure personal safety.
4. All wiring should be performed by a qualified electrician.
5. This fixture is for outdoor use and should not be used in areas with limited ventilation or high ambient Temperatures.
IMPORTANT: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and
operation of the product and the hazards involved.
INSTALLATION:
WARNING-Make sure power is off before installing or maintaining fixture. This flood light is supplied with trunnion mounting bracket
for surface mounting. Make sure fixture is securely mounted.
WIRING:
CAUTION: Check that voltage is compatible
1. Connect the line fixture lead to black supply lead with fixture ballast. Use approved connectors.
2. Connect the common fixture lead to the white supply lead for all electrical connections.
3. Connect the grounding fixture lead to the green supply lead.
TROUBLE SHOOTING CHECKLIST: If the light does not work.
1. Check your power source.
2. Check electrical connections.
©Copyright 2015 Satco Products, Inc. 10/15
Model: 65-072
LED Square Flood Light
Satco Products, Inc.,
Brentwood, NY 11717