Hardware Overview - D-Link DIR-842 Guide D'installation Rapide

Hardware Overview

1 Power LED
2
Internet LED
3 WPS LED
4 Wireless LED
5 LAN LEDs (1-4)
6
LAN Ports (1-4)
7 Internet Port
8 Reset Button
9 Power Port
10
Power Button
11
WPS Button
1 2 3 4
6
A solid green light indicates a proper connection to the power supply.
A solid green light indicates a connection to the Internet port.
A solid green light indicates a successful connection using WPS. The light
will blink during the WPS process.
A solid green light indicates the wireless function is working properly. This
light will blink during data transmission.
A solid green light indicates a connection to a device is working properly.
The LED will blink during data transmission.
Connect Ethernet devices such as computers, switches, and game consoles.
Connect a broadband modem to this port using an Ethernet cable.
Press and hold the reset button with a paper clip for 10 seconds to reset the
router to the factory default settings.
Connect the supplied power adapter.
Press to power the router on and off.
Press for 2 seconds to start the WPS process. The WPS LED will blink during
the process. The light will turn solid green when successfully connecting
to a device.
5
7 9 10 11
8
3