Publicité
Liens rapides
AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
ENSAMBLES DE ESTRIBOS
MONTAGES DE MARCHE-PIEDS
23-3120
23-3125
QTY
ITEM
1,2
2
STEP BAR, PASSENGER (1) AND DRIVER (2)
3
2
FRONT BRACKET
4
4
CENTER/REAR BRACKET
5
12
M8-1.25 X 30MM HEX HEAD BOLT
6
12
M10-1.25 X 30MM BUTTON HEAD BOLT
7
12
M8 FLAT WASHER
8
12
M8 LOCK WASHER
9
12
M10 INTERNAL TOOTH LOCK WASHER
1,2
2
ESTRIBOS, LADO DEL ACOMPAÑANTE
3
2
SOPORTES
4
4
SOPORTES
5
12
PERNOS CON CABEZA HEXAGONAL M8-1,25 X 30MM
6
12
PERNOS TERMINALES DE M10-1.25 X 30MM
7
12
ARANDELAS PLANAS DE M8
8
12
ARANDELAS DE PRESIÓN DE M8
9
12
ARANDELAS DE PRESIó N DE DENTADO INTERIOR DE M10
1,2
2
MARCHE-PIEDS, PASSAGER
3
2
SUPPORT AVANT
4
4
SUPPORT CENTRAL/SUPPORT ARRIERE
5
12
BOULON A TETE DE M8 - 1.25 X 30MM
6
12
BOULON A TETE RONDE DE M10-1.25 X 30MM
7
12
RONDELLE PLATE M8
8
12
RONDELLE A FREIN DE M8
9
12
RONDELLE A FREIN A DENTS INTERIEURES DE M10
STEP 1.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions
completely before beginning.
STEP 2.
Determine front, center, and rear brackets.
STEP 4.
Attach passenger side front, center, and rear bracket to the underside of body panel using two M8-1.25 x
30MM hex head bolts, M8 flat washers, M8 lock washers for each mount location. Hand tighten.
FIGURE 1.
STEP 5.
Attach passenger side step bar to cradles with the
pad closest to the bend goes to the front of the vehicle.
STEP 6.
Make sure step bar and brackets are properly aligned with vehicle and tighten fasteners.
STEP 7.
Repeat installation for driver side.
Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-
abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental,
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 2006-2008 TOYOTA FJ CRUISER
APLICACIÓN:
APPLICATION:
2
DRIVER SIDE
LADO DEL CONDUCTOR
COTE CONDUCTEUR
CONTENTS -
CONTENIDO
(1)
DELANTERAS
CENTRAL/SOPORTE TRASERAS
(1)
ET
CONDUCTEUR (2)
as the compounds scratch the finish and open it to corrosion.
TOYOTA FJ CRUISER
TOYOTA FJ CRUISER
3
PASSENGER SIDE
LADO DEL ACOMPAÑANTE
COTE PASSAGER
1
- CONTENU
Y EL CONDUCTOR
(2)
SEE FIGURE 1.
Westin
logo facing outward.
FINISH PROTECTION
Page 1 of 2
, MOD. 2006-2008
, 2006-2008
4
TOOLS -
HERRAMIENTA
13MM SOCKET
13MM WRENCH
RATCHET
RATCHET EXTENSION
DADO DE 13MM
LLAVE DE TUERCAS DE 13MM
MANERAL
MANERAL EXTENSION
DOUILLE 13MM
CLE 13MM
CLIQUET
RALLONGE DE DOUILLE
SEE FIGURE 2.
REVISION A 3/14/08
- OUTILS
SEE
The step
Publicité
Manuels Connexes pour Westin 23-3120
Sommaire des Matières pour Westin 23-3120
- Page 1 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non- abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
- Page 2 PROTECTION DE LA FINISSION Les produits Westin ont une finission de haute qualité qui requiert des soins, comme toute autre finission du véhicule exposée aux éléments. Protégez la finission à l’aide d’une cire non-abrasive (par exemple, Pure Carnauba) de façon régulière. L’usage de tout savon, pâte à polir ou cire contenant un abrasif est nuisible, puisque les composantes strient la finission et la laissent vulnérable à...