Nicols CL 405 Guide D'utilisation page 10

AP mode: program is executed automatically and DISPLAY shows the step. You can adjust the chasing
speed using TAP SYNC or speed control.
3. Full on and flash: press full on button to activate full on function of all output. Press flash button to activate
full on function of channel. These two functions are effective in any mode.
4. Stand by: press the button once to turn off all out put. Press it once more to exit stand by .the indicator will
change from "flash"to "off".
5. Audio input select: you can select audio signal from mic or audio line input. If you put exit audio line input,
the unit will controlled by exit audio, otherwise it is always controlled by inside microphone.
Warning
1. To prevent fire or shock hazard, do not expose this apparatus to rain or moisture.
2. This apparatus must be earthed.
3. If the fuse is bad, please must use the same type described in the operating instructions.
4. If the apparatus is out of order, do not attempt to service it yourself. Sent back to your supplier for
repairing.
10