Product Description; Assembling The Vacuum Cleaner; Charging The Battery - Concept VP4350 Mode D'emploi

EN

PRODUCT DESCRIPTION

1. Dust container
2. Filter
3. Dust container release button
4. Indicator light
5. On/Off switch
6. Dust container
7. External filter
8. HEPA filter
ACCESSORIES
A. HEPA filter
B. Head for vacuuming liquids
C. Nozzle with a brush *Only for VP4352
D. Slot nozzle
E. Head reducer *for VP4351 and VP4352 only
F. Charging station
G. PET brush *for VP4351 only
H. Car nozzle *for VP4352 only
46
1 2 3 4 5
8
7
6
H
F G
A B. C D E
VP4350 | VP4351 | VP4352
OPERATING INSTRUCTIONS

Assembling the vacuum cleaner

NOTICE
Always switch off the appliance and disconnect the charger from wall socket before assembling or removing
accessories!
Accessories
1. Big brush
2. Slot nozzle
This nozzle is used for vacuuming spaces which are hard to reach, such as radiators, slots, corners, bases, space
between the upholstery, etc.
3. Nozzle with a brush
This nozzle is used for furniture, upholstery, books, lamps, etc.
4. PET brush
This brush is used for vacuuming animal fur directly on the animal (dog, cat).
5. Car nozzle
This nozzle is used for vacuuming spaces in cars which are not easily accessed by vacuum cleaners.
6. Head for vacuuming water
This head is used for vacuuming a smaller amount of water.
7. Head reducer
It is used to attach the PET brush and Car brush to the vacuum cleaner.

Charging the battery

To prolong the life of the vacuum cleaner battery, follow these instructions:
Do not leave the vacuum cleaner fully charged or completely discharged for a long time.
Prolonged discharged of the battery will result in loss of its capacity.
Do not let the vacuum cleaner to be completely discharged.
It is ideal to keep the capacity of the battery between 20 % - 80 %.
During charging, three LED lights next to the power button flash one by one. The charging is complete when all three
LED lights are continuously on.
Operating time at full charge of the battery is approximately 20 minutes.
Using the vacuum cleaner
NOTE
Before using the vacuum cleaner, make sure that the filters are correctly positioned and fixed.
1. Remove the vacuum cleaner from the charging base.
2. Press the On/Off switch to turn on the vacuum cleaner.
3. After you are done using it, press the On/Off switch again to turn it off.
Checking the fullness of the dust container
If the suction power of the vacuum cleaner is reduced or the dust container is full, empty it and clean the vacuum
cleaner filter.
Vacuuming water
The vacuum cleaner also allows you to vacuum a small amount of water. It is necessary to attach the head for vacuuming
liquids to the vacuum cleaner. However, the amount of water must not exceed the maximum level of dirt of the dust
container. Empty the dust container before vacuuming water. Never leave water in the container.
VP4350 | VP4351 | VP4352
EN
*for VP4351 only
y
*for VP4352 onl
*VP4351 and VP4352 only
47