Special Instructions; For Future Reference - Brentwood Appliances TS-651 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Do not operate the product if it has a damaged or cut Power Cord or plug, if wires are
exposed, if it malfunctions, if it is dropped or damaged, or if the Motor Housing is dropped
in or exposed to water.
• Do not attempt to examine or repair this product yourself. Only qualified service
personnel should perform any servicing; take the product to the appliance repair shop of
your choice for inspection and repair.
• Do not put any stress on the power cord where it connects to the product, as the power
cord could fray and break.

SPECIAL INSTRUCTIONS:

A short power supply cord is provided to reduce the risk of becoming entangled in or tripping
over a longer cord. An extension cord is not recommended for use with this product, but if
one must be used:
 The marked electrical rating must be at least as great as that of the product;
 If the product is of a 3-prong grounding type, the extension cord must be a grounding-
type 3-wire cord.
 Arrange the extension cord so that it will not drape over the countertop or tabletop
where it can be tripped over or pulled.
WARNING: This product is equipped with a polarized plug (one blade is
wider than the other blade) to reduce the risk of electrical shock. This
is a safety feature. The plug will fit into a polarized outlet only one way.
If you are unable to insert the plug into the electrical outlet, try
reversing the plug. If the plug still does not fit, contact a qualified electrician. Never use the
plug with an extension cord unless you can fully insert the plug into the extension cord. Do
not alter the plug. Do not attempt to defeat the safety purpose of the polarized plug.
Before First Use
IMPORTANT: Please check all packaging material carefully before discarding as there
may be accessory parts contained within the packaging material.
WARNING: Do not place any part of the product in a dishwasher.
1. With a damp cloth, gently wipe down the grill plates. This removes any dust or
residue that may have accumulated.
2. Plug the grill into the nearest Electrical Outlet. The Power Light will come on to
indicate the appliance is plugged in.
3. Preheat the appliance with the cover closed for about 3 minutes.
Attention: First use may cause a slight odor or small smoking upon heating, it is
SAVE THESE INSTRUCTIONS

FOR FUTURE REFERENCE

3

Publicité

Table des Matières
loading

Table des Matières