Using Your; Using The Vacuum Cleaner; Charging The Vacuum Cleaner - JAP BIONIC BLAST CYCLONE C3 Mode D'emploi

Using your

CAUTION: Check occasionally if the accessory is clean, otherwise scratches could appear on
sensitive surfaces.

USING THE VACUUM CLEANER

1. Place the changeable battery in the backside of the
2. Slide the metal stalk or one of the accessories on the base until you hear a click sounds. In
case of the stalk, attach one of the attachments to the other end. [FIG. 2]
FIG. 2
3. Turn the device on or off by pressing the
to the low setting.
4. Press the to set the vacuum cleaner in the high setting.
5. Press the again to set the vacuum cleaner back in the low setting.

CHARGING THE VACUUM CLEANER

1. If the light of the charging indicator starts flashing, turn the vacuum cleaner off
and charge the battery.
2. The indicator light
3. While the device is charging the lights will keep flashing. When fully charged,
the light will be on continuously.
4. Then the
CAUTION:
• The battery can also be removed and charged directly. During the charging the light is
When fully charged, it changes to a
• Always make sure that the
• The vacuum cleaner may not be used during the charging process.
. The vacuum cleaner is by default set
starts flashing as soon as the devices makes contact with the adapter.
is ready for use again.
colour.
is turned off when it is connected to the adapter.
17
.
.