Xtricity 1-69013 Instructions

Please read the following instructions carefully. ALWAYS ensure that the lamp is unplugged and switched off,
BEFORE commencing assembly or replacing a bulb.
Instructions
1. Remove all the components from the packaging.
2. Assemble the table clamp as shown (1), and tightly secure to your working surface.
3. Insert the lamp post (2) into the clamp.
4. Adjust the friction knobs (3) so that the lamp can be adjusted freely while still being held in place.
5. Install the bulb and insert the plug cord into a wall outlet.
WARNING :
1. Use 60W maximum A19 bulb (not included).
2. Do not use polishes or cleaners, just wipe clean with a soft cloth.
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted. Do not alter the plug.
For item / Pour item 1-69013
INSTRUCTIONS
Magnifier
On / Off switch
Polarized plug