Toshiba STOR.E ALU TV KIT 2.5 Mode D'emploi page 5

System Requirements
TV or set-top box with USB recording function (PVR)
■
Windows
■
CPU with 750 MHz or faster
■
10 MB system hard disk space
■
256 MB system memory
■
One free port of USB 3.0 or USB 2.0
■
USB 3.0 is backward compatible with USB 2.0.
NOTE
Installing the drive
Some information about bus-powered operation and the supplied USB cable:
Your drive is bus-powered. Therefore, there is no need to connect an
■
external power supply as all needed current will be supplied by the
connected USB port(s).
Passive USB hubs or USB connectors like keyboards, mice or similar
■
products cannot be used or connected to the drive.
Make sure that the connectors will be inserted correctly.
■
Never use pressure for connecting the cables. Check the polarity before
■
connecting!
Connecting the drive to your TV
User's Manual
® XP / VISTA ® / Windows
STOR.E ALU TV KIT 2.5"
® 7 / Windows 8
EN-5