Connection To The Electricity Supply - Wahl Bach OTS 5 Instructions De Montage Et D'utilisation

DE GB NL FR

Connection to the electricity supply

The device must be filled with water (see above). Only then
may the appliance be connected to the electricity supply
(insert the plug in the wall socket). Connection of the device
to the power supply network must take place in accordance
with electric installation standards and as specified by local
laws and regulations. The device must be directly connected
to the power supply network (230V) via an electrical cable
and plug.
Avoid danger from damaged power supply cables. In the
event of damage, the device must be replaced by the manu-
facturer or its customer service department, or by an equiv-
alently-qualified person.
Ensure that the addition of this boiler will not overload the
fuse protection in your mains.
Internal modifications to the product may cause problems
if this work is not carried out by authorized and qualified
technical staff. The warranty only applies if the product has
not been modified in any way, i.e. subject to it being in un-
changed condition.
In order to avoid creating an unsafe situation by inappropri-
ate resetting of the maximum temperature safety device,
this unit may not be powered via an external switching de-
vice (a time switch for example) or connected to a circuit,
which is regularly switched on and off by the power supply
company.
13