ATH-Heinl Single Lift 12P Manuel D'utilisation page 59

5. Driving Out
a. Lower the lift completely.
b. Drive the vehicle out of the lift.
1.4 Technical Data
Type of the lift
Max. capacity
Time for lifting
Time for lowering
Electro system
Motor
Fuse
Protection
Working pressure
Operating temperatures
Öil (H-LPD 32)
Noise level
Weight
Max. lifting height
Max. height
Min. height
Max. width
Total width (incl. Aggregate)
Floor anchoring
Anchors quantity
The already factory-set hydraulic work pressure is adjusted to the maximum rating. The
²
setting of the pressure control valve may not be changed. Any changes to the settings
could cause serious damages.
If the nominal load could be not lifted, please contact our service team.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-11
ATH-Single Lift 12P
Max. 1200 kg
15 sec.
16 sec.
3~400V/50Hz
3,0 kW
3 C 16 A
IP 64
115 Bar
5-50 °C
Appr. 10,5 l
84 dB
520 kg
1900 mm
1820 mm
80 mm
1900 mm
2640 mm
Verbundanker: M16 x 190 (z.B.: Atrion AVA-W 16-045-190)
6
Manufacturer ATH-Heinl GmbH & CO.KG
- 9 -