Final Touch FTR006 Instructions De Montage

Under Cabinet 6 Bottle Wine & Glass Rack - Model: FTR006
MOUNTING INSTRUCTIONS (READ BEFORE MOUNTING)
STEP 1: Choose appropriate location to mount the wine rack.
STEP 2: Leave a gap between the back of the wine rack and wall to allow for bottle clearance (Fig.1).
A gap of 2 inches on both sides is recommended to help ensure most standard bottles will fit properly into the wine
rack. This gap may vary depending on the depth of the upper cabinet and bottles being used.
Fig.1 (Top View).
Mark line
(both sides)
GAP
STEP 3: Ensure the cross bars marked (B) below are positioned
closest to the wall before mounting.
C C
B B B
C C
NOTE: The included hardware is recommended for use with 3/4 inch thick cabinets. Measure the thickness of
your cabinet before mounting to avoid piercing through the top side of cabinet.
STEP 4: Position the rack within the gap lines previously marked and secure the rack to the bottom of the cabinet
with the 4 included mounting screws in each of the 4 holes marked (C). It is recommended two people are used to
help mount the wine rack to avoid personal injury.
pg. 1
Final Touch® | www.AlwaysFinalTouch.com