Photo Camera Settings; Video Camera Settings - Abus TVVR11000 Manuel Utilisateur

You can change the following menu items here:
Menu item Explanation
Beep Button sound on or off.
Time Display Select whether the time/date appears in the recordings.
Ring buffer on or off (i.e. when the SD card is full, the device overwrites the oldest
Loop Record
data).
AutoStandby Automatic standby function between 2.5 and 10 minutes or no automatic standby.
TV standard TV standard the recording should be in. (PAL is used in Europe / NTSC in USA).
Format To format your micro SD card.
Default The device is restored to the factory settings or delivery status.
Language The menu can be set in 7 different languages here.
Frequency To decide between 50 and 60 Hz to prevent flickering in the preview.
Date / Time To set the data and the time.

8.3 Photo camera settings

Menu item Explanation
Single Shot If this option is activated, the device takes a single photo.
Tripple Shot If this option is activated, the camera takes 3 photos when triggered once.
Here the device takes a photo every x seconds. The number of seconds is also set
Continuous
here.
Self Shot Only one photo is taken after the set seconds have elapsed.
Resolution The resolution is set: 3M = 2048 x 1536, 5M = 2592 x 1944, 8M = 3200 x 2400.

8.4 Video camera settings

Menu item Explanation
Resolution Here you can decide between various recording resolutions.
Here you can decide between a 6 or 12 Mbit-rate. However, to achieve higher quality
Bitrate
you should select the 12M option.
You can select the recording type at this item. You have the option of audio recording
Capture Mode
only or video and audio recording.
11
English